Contact Us:

Bearing Kinetics Inc.
3410 Irving Blvd.
Dallas, Texas 75247

P.  972-241-5869
F.  972- 241-5683

View Map

Worldwide Shipping

We ship:
Red Blue Orange



We Ship Worldwide
bearings international

Thomson Precision Ball

Thomson Precision Ball

Thomson Precision Steel Ball Bushing* Bearing offer

  • A coefficient of friction as low as .001. When replacing high friction plain bearings, Precision Steel Ball Bushing bearings dramatically improve machine productivity and efficiency.
  • All-steel construction, for maximum system rigidity.
  • Two accuracy classes allowing for immediate improvements in system positioning and repeatability.
  • Availability in fourteen bore sizes and nine configurations.
  • The RoundRail* Advantage which minimizes installation time and cost.
  • Steady state travel speeds up to 10 ft/s and accelerations to 450 ft/s2 without the use of derating factors.
  • An operating temperature up to 600º F.
  • Availability in a self-aligning pillow block housing for ease of installation and use.
  • Worldwide availability from over 1800 authorized distributors.
  • Thomson Super Ball Bushing Bearings (Closed type)
  • Available in sizes 3/16 to 2 inch diameter.
  • Load Capacity range from 35 to 3,000 lbf.
  • Self-aligning in all directions.
  • Can be mounted in a custom housing.
  • Can be adjusted to take out diametrical clearance.
  • Travel speeds up to 10 ft/s.
  • Available with corrosion resistant components.

Thomson Super Ball Bushing Bearings (Open Type)

  • Available in sizes 1/2-2 inch diameter.
  • Load capacity ranges from 230 to 2,350 lbf.
  • Self-aligning in all directions.
  • Can be adjusted to take out diametrical clearance.
  • Can be mounted in customized housing.
  • Travel speeds up to 10 ft/s.
  • Available with corrosion resistant components.

Thomson Sealed Super Ball Bushing Bearings (Closed type)

  • Integral double acting seals retain lubrication and keep out contamination.
  • Available in sizes 1/2, 3/4 and 1 inch nominal diameter.
  • Load capacity range from 255 to 1,050 lbf.
  • Self-aligning in all directions.
  • Can be adjusted to take out diametrical clearance.
  • Can be mounted in a custom housing.
  • Travel speeds up to 10 ft/s.
  • Available with corrosion resistant components.

Thomson Sealed Super Ball Bushing Bearings (OpenType)

  • Standard integral double acting seals retain lubrication and keep out contaminants.
  • Available in sizes 1/2, 3/4 and 1 inch diameter.
  • Load capacity ranges from 230 to 780 lbf.
  • Self-aligning in all directions.
  • Can be adjusted to take out diametrical clearance.
  • Can be mounted in customized housing.
  • Travel speeds up to 10 ft/s.
  • Available with corrosion resistant components.

Thomson Super Ball Bushing Bearing Pillow Blocks (Closed Type)

  • Available in sizes 1/4 to 2 inch diameter.
  • Load capacity range between 60 and 3,000 lbf.
  • Available with standard integral double acting seals.
  • Travel speeds up to 10 ft/s.
  • Available with or without diameter adjustment capability.
  • Easily mounted and secured with four mounting bolts (sizes 1/4 and 3/8 secured with two mounting bolts).
  • Available with a standard lubrication access.

Thomason Super Ball Bushing Bearing Pillow Blocks (Adjustable Type)

  • Available in sizes 1/4 to 2 inch diameter.
  • Load capacity range between 60 and 3,000 lbf.
  • Available with standard integral double acting seals.
  • Travel speeds up to 10 ft/s.
  • Available with or without diameter adjustment capability.
  • Easily mounted and secured with four mounting bolts (sizes 1/4 and 3/8 secured with two mounting bolts).
  • Available with a standard lubrication access.
  • Thomson Super Ball Bushing Twin Pillow Blocks (Closed Type)
  • Available in sizes 1/4 to 1 1/2 inch diameter.
  • Load capacity range between 120 and 4,000 lbf.
  • Available with standard integral double acting seals.
  • Travel speeds up to 10 ft/s.
  • Available with or without diameter adjustment capability.
  • Easily mounted and secured with four mounting bolts.
  • Available with a standard lubrication access.

Thomson Super Ball Bushing Cartridge Bearings

  • Available in sizes 1/4, 3/8 and 1/2 inch diameter.
  • Can be easily installed into a soft or slightly out-of-round housing.
  • Available in both single or twin versions and with or without integral double acting seals.
  • Single versions are self-aligning in all directions.
  • Twin versions minimize installation time and cost.
  • Available with corrosion resistant components.

Thomson Miniature Instrument Ball Bushing Bearings

  • Available in sizes 1/8, 3/16 and 1/4 inch bore diameter.
  • Available with matching 60 Case LinearRace* sets.
  • Coefficient of friction as low as .001.
  • Compact size for low inertia and weight.
  • Precision bearing balls, sleeve and 60 Case Linear Race manufactured of corrosion resistant stainless steel.
  • Load Capacity range between 7 and 19 lbf.

Thomson Die Set Ball Bushing Bearings

  • Available in sizes 1, 1 1/4, 1 1/2 and 2 inch bore diameter.
  • Load Capacity range between 350 and 1,100 lbf.
  • All steel construction for maximum rigidity.
  • Travel speeds up to 10 ft/s.
  • Easily mounted by simply bolting toe clamps in place.
  • Can be mounted perpendicular to mounting surface.
  • High operating temperature capability.
  • Coefficient of friction as low as .001.

  
 
 
 
 
 
Aerospace
Agricultural and Farm Bearings
Automotive
Consumer Electronics
Electric Motor
Fishing Reels
Industrial Machinery
Marine Applications
Medical Instruments
Motorcycle Bearings
Power Tools
Racing
Radio Control Cars
Recreation
Robotics